Skip to product information
1 of 1

Old to New Furniture

Hokus Pokus; Juliette Decor-Weave

Hokus Pokus; Juliette Decor-Weave

Regular price $38.00 CAD
Regular price Sale price $38.00 CAD
Sale Sold out
Tax included. Shipping calculated at checkout.

*Information about Hokus Pokus Decor-Weaves (Decoupage)

Weave Size: 74cm x 59.35cm (29.1″ x 23.3″)
No of Pieces: 1
Package Size: 31.5cm x 25cm
There are instructions on the back of package.

Hokus Pokus new “Décor-Weave” designs will inspire you to upcycle your old, previously loved furniture from drab to fab!Hokus Pokus Décor-Weave designs are highly detailed expressions of art which can be applied to natural wood, painted furniture or a surface of your choice.
Requirements for applying a Hokus Pokus Décor-Weave: 1.) a piece of furniture or project which has been completed to a smooth finish, painted or sanded natural wood
2.) a Décor-weave Design; 3.) paint brush; 4.) brayer; 5.) water-based sealer
6.) 400 grit sand paper; 7.) clean water 8.) clean cloth; 9.) Iron
Optional extra is a glass of wine
With the iron on a COOL, DRY (NOT STEAM) setting, gently iron the back of your
Décor-Weave design to remove initial fold lines.
The prepared furniture piece: wipe down with a wet cloth to remove all the dust.
It is vitally important to remove all excess dust before applying any Hokus Pokus Décor-Weave to your project.
Sharp pieces of wood splinters or chipped paint, no matter how small, can spoil the surface and texture of your Décor-Weave project.
All painted surfaces must be 100% dry to avoid the Hokus Pokus Décor-Weave from lifting or creating air bubbles.
Always plan beforehand where you are going to place your Hokus Pokus Décor-Weave and cut to size, if needed.
Applying the Décor-weave: Apply a base coat of a good quality polyurethane water-based sealer, while still wet place the Hokus Pokus Décor-Weave in the desired place, ensure all air bubbles are removed by rolling with a brayer.
Wait about 30 min then apply a 1st coat of sealer over the Hokus Pokus
Décor-Weave, wait until 100% dry then apply a 2nd coat and 3rd coat, ensure the surface is completely dry as per manufacturer’s instructions – don’t rush this phase. Once 100% dried and cured, gently sand the whole design with 400 grit sandpaper to a smooth texture. Clean with a wet cloth.
The last very important step is to sit back and enjoy your masterpiece then share your project on our Hokus Pokus Instagram, Facebook or Pinterest pages.

Materials

Shipping & Returns

Dimensions

Care Instructions

View full details